OBD-II Plug 12V with Shroud + Strain Relief + Locking Nut

OBD-II 12V Plug Complete With Shroud and Locking Nut

Description:

• OBD-II Plug.
• Type A (12V).
• Thin Wall Type to fit all OBD-II cars especially late model Audi.
• Has all 16 pins installed and are solderable.
• Comes with shrouds, locking nut and cable strain relief.
• Screw together design.

Lock Nut:

Please note the locking nut that is supplied with the connector for the strain relief. This is an item that is not normally supplied by my competitors.

New From 2013:

The connector has been specifically manufactured for ECUFix and is of the highest quality. There is also a pcb mounted at the back of the connector for additional connection security.

Technical Specification:

• OBDII Plug: J1962 16-Pin Male (to Car)
• Weight : About 35g
• Color : Black

OBD2 Connector Pinout

PIN 1 - Manufacturer's discretion 
PIN 2 - SAE J1850 Line (Bus +) * 
PIN 3 - Manufacturer's discretion 
PIN 4 - Chassis Ground 
PIN 5 - Signal Ground 
PIN 6 - SAE J2284 (CAN High) * 
PIN 7 - K Line of ISO 9141-2 & ISO/DIS 4230-4* 
PIN 8 - Manufacturer's discretion 
PIN 9 - Manufacturer's discretion 
PIN 10 - SAE J1850 Line (Bus -) * 
PIN 11 - Manufacturer's discretion 
PIN 12 - Manufacturer's discretion 
PIN 13 - Manufacturer's discretion 
PIN 14 - SAE J2284 (CAN Low) * 
PIN 15 - L Line of ISO 9141-2 & ISO/DIS 4230-4* 
PIN 16 - Unswitched Vehicle Battery Positive