OBD-II Moulded 12V Plug With 2 Metres of Cable
- OBD-II Plug.
- Type A (12V).
- Thin Wall Type to fit all OBD-II cars especially late model Audi.
- Has all 16 pins installed and connected.
- Lead is stripped, tinned and solderable.
- Comes pre-moulded with shrouds and cable strain relief bonded to the cable.
- Tamper-proof design.
- 1 metre of cable included.
- OBDII Plug: J1962 16-Pin Male (to Car)
- Weight : About 50g
- Color : Blue
OBD2 Connector Pinout
1 - Black
2 - Brown
3 - Red
4 - Orange
5 - Yellow
6 - Green
7 - Blue
8 - Purple
9 - Grey
10 - White
11 - Light Red
12 - Light Green
13 - Black/White
14 - Brown/White
15 - Red/White
16 - Orange/White
PIN 1 - Manufacturer's discretion
PIN 2 - SAE J1850 Line (Bus +) *
PIN 3 - Manufacturer's discretion
PIN 4 - Chassis Ground
PIN 5 - Signal Ground
PIN 6 - SAE J2284 (CAN High) *
PIN 7 - K Line of ISO 9141-2 & ISO/DIS 4230-4*
PIN 8 - Manufacturer's discretion
PIN 9 - Manufacturer's discretion
PIN 10 - SAE J1850 Line (Bus -) *
PIN 11 - Manufacturer's discretion
PIN 12 - Manufacturer's discretion
PIN 13 - Manufacturer's discretion
PIN 14 - SAE J2284 (CAN Low) *
PIN 15 - L Line of ISO 9141-2 & ISO/DIS 4230-4*
PIN 16 - Unswitched Vehicle Battery Positive
Note: I do have a few pieces of the same item but with only 1 metre of flying lead. Sometimes I may substitute 1 metre long cable instead of this item. If you really want 2 metres, please either leave a note with your order or email me directly. Thanks, Andy
This product was added to our catalog on Saturday 29 December, 2018.