OBD-II Plug 24V with Shroud + Strain Relief + Locking Nut

  • Model: OBDPLUG24-P
  • Shipping Weight: 35g
  • 7 Units in Stock
  • Manufactured by: ECUFix

£6.49

Add to Cart:

OBD-II 24V Plug Complete With Shroud and Locking Nut

Description:

  • OBD-II Plug.
  • Type B (24V).
  • Thin Wall Type to fit all OBD-II vehicles.
  • Has all 16 pins installed and are solderable.
  • Comes with shrouds, locking nut and cable strain relief.
  • Screw together design.

Lock Nut:

Please note the locking nut that is supplied with the connector for the strain relief. This is an item that is not normally supplied by my competitors.

The connector has been specifically manufactured for ECUFix and is of the highest quality. There is also a pcb mounted at the back of the connector for additional connection security.

Technical Specification:

  • OBDII Plug: J1962 16-Pin Male (to Car)
  • Weight : About 35g
  • Color : Black

OBD2 Connector Pinout

PIN 1 - Manufacturer's discretion 
PIN 2 - SAE J1850 Line (Bus +) * 
PIN 3 - Manufacturer's discretion 
PIN 4 - Chassis Ground 
PIN 5 - Signal Ground 
PIN 6 - SAE J2284 (CAN High) * 
PIN 7 - K Line of ISO 9141-2 & ISO/DIS 4230-4* 
PIN 8 - Manufacturer's discretion 
PIN 9 - Manufacturer's discretion 
PIN 10 - SAE J1850 Line (Bus -) * 
PIN 11 - Manufacturer's discretion 
PIN 12 - Manufacturer's discretion 
PIN 13 - Manufacturer's discretion 
PIN 14 - SAE J2284 (CAN Low) * 
PIN 15 - L Line of ISO 9141-2 & ISO/DIS 4230-4* 
PIN 16 - Unswitched Vehicle Battery Positive


This product was added to our catalog on Thursday 11 October, 2018.

Your IP Address is: 54.167.15.6
Copyright © 2018 ECUFix. Powered by Zen Cart