OBD-II Moulded 24V Plug With 2 Metres Of Cable

Please note that these are available to order with your own colour insert too. Standard, these leads come with a black insert. Lead time from order to delivery is around 3 weeks.

Description:

These are nicely manufactured leads. The cable shell is moulded around the connector insert and cable. The cable end itself is made up with pre-stripped and tinned free-ends.

The difference between 12V and 24V plugs is that the 24V versions have a slot cut into them, this stops a 12V plug from being accidentally plugged into a 24V socket. However, these 24V types can still be plugged into a standard 12V socket.

• OBD-II Plug.
• Type B (24V).
• Used mainly for trucks and commercial vehicles but will also fit 12V sockets as well.
• Thin Wall Type to fit all OBD-II applications.
• Has all 16 pins installed and connected.
• Lead is stripped, tinned and solderable.
• Comes pre-moulded with shrouds and cable strain relief bonded to the cable.
• Tamper-proof design.
• 2 metres of cable included.

Technical Specification:

• OBDII Plug: J1962 16-Pin Male (to Truck)
• Weight : About 50g
• Color : Black

OBD2 Connector Pinout

PIN 1 - Manufacturer's discretion
PIN 2 - SAE J1850 Line (Bus +) *
PIN 3 - Manufacturer's discretion
PIN 4 - Chassis Ground
PIN 5 - Signal Ground
PIN 6 - SAE J2284 (CAN High) *
PIN 7 - K Line of ISO 9141-2 & ISO/DIS 4230-4*
PIN 8 - Manufacturer's discretion
PIN 9 - Manufacturer's discretion
PIN 10 - SAE J1850 Line (Bus -) *
PIN 11 - Manufacturer's discretion
PIN 12 - Manufacturer's discretion
PIN 13 - Manufacturer's discretion
PIN 14 - SAE J2284 (CAN Low) *
PIN 15 - L Line of ISO 9141-2 & ISO/DIS 4230-4*
PIN 16 - Unswitched Vehicle Battery Positive